How to price material in a CNC quote
Why material is easy to get wrong
Material is the one cost on a CNC quote you buy from someone else at a price you don’t control, so the mistakes are expensive and immediate. In a 2014 Practical Machinist thread, a small-shop owner figured a six-foot bar at about $18 for a print that called for a superseded steel spec; the material the spec actually required came to over $500 [6]. Small costs slip through too: “Don’t forget delivery charges in the material price!! That catches me out far too often on the little jobs” [5].
Read the material callout first, look up any spec, and confirm the size is something you can buy. The rest of this guide assumes you know what alloy, temper and condition you are pricing.
Step 1: Size the blank from the part envelope
Take the finished part’s largest dimensions in each direction and add what the process eats:
- Facing and clean-up: enough to face both sides and clean up saw-cut or mill edges, often 1/16 in to 1/8 in a side.
- Saw kerf: the width the blade removes on every cut, if you saw your own blanks.
- Holding stock: extra length or thickness to grip in the vise or chuck, if the part has no other way to be held for the first operation.
Then round up to a size you can buy. A 1.00 in thick part with facing on both sides does not come out of 1 in plate; it comes out of 1-1/8 or 1-1/4 in. On turned parts, the bar diameter is the next standard size above the largest diameter plus clean-up. A supplier that cuts to length makes the same point from the other side: if a dimension is critical, “do what machinists do: order 1/4″ long and face it to final size on your own equipment” [2].
Step 2: Turn the blank into a price
Suppliers sell by the pound, by the foot, by the bar or by the cut piece. Convert whatever they quote into a cost per blank. For prices by weight, weight is volume times density: 6061-T6 aluminum is 0.0975 lb/in³ [1]. A 1.25 × 3.25 × 4.25 in blank is 17.27 in³, or 17.27 × 0.0975 = 1.68 lb.
Short pieces are not proportionally cheap. One Canadian supplier’s cut-to-length price for the same flat bar was $3.65 for 1 in, $4.10 for 4 in and $5.30 for 12 in (CAD, September 2026), because “the first inch carries the handling and the cut” [2]. If you buy one blank at a time, price the piece as the supplier sells it, not the volume times a per-pound rate.
Step 3: Bar or plate, and what to do with the drop
The same part can often come from flat bar or from plate, and the cheaper choice depends on the quantity and on your saw.
- Cut blanks from plate: the supplier saws them to size, so you pay a cut charge but buy close to what you use. Good for wide parts, small quantities, and shops without a big saw.
- Full-length bar sawn in-house: usually a lower price per pound and no supplier cut charge, but you pay for saw time and you own whatever is left over.
That leftover is the drop. Charge it to the job unless you are confident you will use it soon: a remnant on the rack for two years earned nothing. If you do credit it, credit what you would really pay for that length again, not the full bar price. Either way, decide on purpose; the difference can be most of the margin on a small order.
Step 4: Cut charges, minimums and freight
Cut charges have a shape: a base charge per order and a smaller charge per piece that falls with quantity. One supplier lists a $30 base for plate-saw cutting, plus $3.00 a piece at 10 to 49 pieces, $2.50 at 50 to 99 and $1.00 at 100 or more, and notes that its prices are subject to change [3]. Put the base charge in your lot costs, so it spreads across the quantity like setup does.
Ask about order minimums and freight on every small job. A minimum order or a delivery charge on a one-piece job can cost more than the metal, and it belongs on the quote, not in your overhead.
A worked example: 25 aluminum blanks, two ways
The 6061-T6 housing needs a 1.25 × 3.25 × 4.25 in blank. The order is 25 pieces, and you buy 2 spares to prove out the setup, so 27 blanks. Prices per pound, freight and saw time are illustrations; the cut charge follows the published example above [3].
| Compared | A: cut blanks from plate | B: one 12 ft flat bar, sawn in-house |
|---|---|---|
| Stock | 27 blanks, 1.25 × 3.25 × 4.25 in | 1.25 × 3.5 in bar, 144 in long |
| Weight | 27 × 1.68 lb = 45.45 lb | 630 in³ × 0.0975 = 61.43 lb |
| Price per lb | $6.00 | $5.25 |
| Metal | $272.71 | $322.48 |
| Cutting | $30 + 27 × $3.00 = $111.00 | 27 cuts × 1.5 min at $60/h = $40.50 |
| Freight | $40.00 | $40.00 |
| Total | $423.71 | $402.98 |
| Per good piece (÷ 25) | $16.95 | $16.12 |
The bar is a little cheaper even when the whole bar is charged to the job, and much cheaper if the drop really gets used. At 5 pieces the answer flips: the bar is still a full bar, and the plate supplier’s base charge is the only fixed cost. Work both out on any order where material is a large share of the price.
Then add your markup. With a 15% material markup, A becomes $16.95 × 1.15 = $19.49 a piece and B $16.12 × 1.15 = $18.54.
Step 5: Markup on material
Material markup pays for real work: getting prices, ordering, receiving, checking certs, storing the stock, the cash tied up until the customer pays, and the risk of scrapping a blank. A common approach is a percentage on top of the material cost, kept separate from the margin on machining, so the quote shows how much of the price is metal.
Be consistent about whether that percentage is a markup on cost or a margin on price; the difference is explained in how to quote CNC machining jobs. And add any expected scrap as extra material bought per piece before the markup, so the markup covers it too.
Step 6: Price volatility and quote validity
Metal prices move between the quote and the PO. In a 2026 thread on material pricing, one shop said it tells customers its material prices are good for 24 hours, and another saw stainless jump 50% in the two weeks between quote and go-ahead [4]. Suppliers say the same in their own terms: one notes that its prices “update daily with the metal market” [2].
Protect yourself in writing. Print how long the material price holds on the quote, and re-check the material when a PO arrives after that date. On long-running or high-value work, some shops quote material at the price on the day of the order instead. When a supplier hasn’t answered in time, one estimator uses a web catalogue price as a safe number: “It gives you a # to work with TODAY to get your quote out TODAY” [7].
Our free CNC quote template has a validity date built in, and the quantity break calculator carries per-piece material through every break.
Material in QuoteSooner
QuoteSooner keeps your own material price list: by material and form (round bar, flat bar, plate or tube), optionally by size, priced per pound, per kilogram, per cubic inch or per bar, and importable as CSV. On the worksheet, material is a cost per piece with its own markup and an optional scrap percentage. When a 3D model comes with the request, the optional starting price names the stock it assumed, rounded up to a standard plate thickness or bar diameter after the stock allowance you set, and prices it from the most specific matching line on your list. A part can be marked as a casting or forging, or as customer-supplied material, which takes material off the price.
You can set how long material prices hold. The quote prints the window, the price list marks lines older than it, and an order whose PO arrives after it says so. The free plan covers 5 RFQs a month for one user, with no card: start free.
Questions
- How do you calculate material cost for a CNC part?
- Size the blank from the part’s envelope plus facing, kerf and holding stock, and round up to a stock size. Convert the supplier’s price (per pound, per foot or per piece) into a cost per blank, add cut charges, minimums and freight, and divide by the good pieces in the order. Then add your material markup.
- How much stock allowance should I add to a CNC blank?
- Enough to face and clean up every surface you machine, plus saw kerf and any holding stock. Often 1/16 in to 1/8 in a side for clean-up; more if the first operation needs extra length to grip. Then round up to the next size you can buy [2].
- Should I charge the customer for the bar drop?
- Charge it unless you are confident you will use the remnant soon. If you credit it, credit what that length would really cost you to buy again. In the example here, the drop is worth $55.71, or $2.23 a piece on a 25-piece order.
- How long should a material price on a quote be valid?
- Short enough that the metal market can’t move much in that time. One shop holds its material prices for 24 hours; another saw stainless rise 50% in the two weeks between quote and go-ahead [4]. State the window on the quote and re-check material when a late PO arrives.
- What is the density of 6061 aluminum for weight calculations?
- 0.0975 lb/in³, or 2.7 g/cm³ [1]. Multiply by the blank’s volume in cubic inches to get its weight in pounds.
Sources
Facts about other products come from their own websites, read on the dates shown. If something has changed, tell us at hello@quotesooner.com and we will correct it.
- ASM Aerospace Specification Metals: Aluminum 6061-T6; 6061-T651 datasheet read October 30, 2026
- Metals ’R’ Us: How does cut-to-length metal ordering work? (updated September 13, 2026) read October 30, 2026
- Alcobra Metals: 1.00″ aluminum cast tooling plate, cutting price breakdown read October 30, 2026
- Practical Machinist: How do you handle material pricing when you quote? (2026) read October 3, 2026
- Practical Machinist: Quoting work, how do you do it? (2011) read October 3, 2026
- Practical Machinist: ASTM A109, screwed myself on a quote (2014) read October 3, 2026
- Practical Machinist: Methods to expedite quoting (2020) read October 3, 2026

